• QY球友(中国)QY

    High-throughput workflow for the genotypic characterization of transposon library variants

    Ana Mariya Anhel, Lorea Alejaldre, Ángel Goñi-Moreno

    Published: 2022-10-27 DOI: 10.17504/protocols.io.kqdg394jzg25/v1
    AI 解读
    浏览 1715

    Abstract

    This is a workflow for the genotypic characterization of transposon library variants. It has been developed using an open-source Opentrons OT-2 robot, BLASTN for genomic annotations and modular sub-protocols (e.g., PCR sample preparation, OT-2 volume transfer, OT-2 counter selection, etc) that can be used for other tasks, thus providing a general-purpose pipeline.

    All steps follow a 96-well plate format for high-throughput analysis. The protocol is described for the characterization of transposon library variants generated with SEVA-Sib pBAMD1-x and pBLAM1-x plasmid sets that follow Standard European Vector Architecture (SEVA, http://seva-plasmids.com) and can be amplified with the standard PS1-PS6 primers. After the description of the protocol we present the results of an example generated at our laboratory (http://biocomputationlab.com) using the soil bacterium Pseudomonas putida KT2440 as acceptor strain.

    Steps

    Colony picking in selective media

    1.

    Dispense 100µL of selective media (M9-citrate for P. putida or Luria-Bertani plus 20 ng/µL nalidixic acid for DH5 α E. coli ) plus transposon cassette antiobiotic in a 96-well plate

    2.

    Pick individual colonies into a 96-well plate with selective media

    Tip: Keep tips inside of wells to keep track

    3.

    Cover with a sterile breathable membrane

    4.

    Grow at 30°C ( P. putida ) or 37°C ( E. coli ) / 500rpm

    Counter-selection and glycerol stocks pre-cultures

    5.

    Measure OD600nm of overnight culture grown in selective media from plus transposon cassette antibiotic in a plate reader

    6.

    Inoculation of counter-selection plate in selective media:

    • Dispense 100µL of selective media (M9-citrate for P. putida or Luria-Bertani plus 20 ng/µL nalidixic acid for DH5α E. coli ) plus ampicillin (backbone antibiotic) to select against spurious integration events.
    • Transfer 5µL of overnight culture from to counter-selection (ampicillin) plate
    • Cover with a sterile breathable membrane
      Note
      For steps 6 and 7, if two or more 96-well plates are used as input it is advised to use the OT-2 protocol below to minimize human error. Dispensed volume and culture volume inoculated should be that described in these steps. Note that steps 6 and 7 could be completed together in a single run depending on the number of initial plates.

    OT-2 Media dispensing and culture inoculation protocol

    7.

    Inoculation of precultures for glycerol stock in rich media:

    • Dispense 100µL of Luria-Bertani media plus transposon cassette antiobiotic in a 96-well plate
    • Transfer 5µL of overnight culture from to counter-selection (ampicillin) plate
    • Cover with a sterile breathable membrane
    8.

    Grow counter-selection and glycerol stock pre-culture plates at 30°C ( P. putida ) or 37°C ( E. coli ) / 500rpm

    9.

    Measure OD600nm of overnight culture grown in selective media plus ampicillin in a plate reader

    Colony selection in OT-2 liquid handler robot

    10.

    Selection of colonies to store as glycerol stocks and do further PCR reactions by running the following OT-2 protocol with its corresponding template.csv

    OT-2 Counter-Selection

    Note
    The OT-2 protocol will prepare three plates (2 glycerol stock plates and a "PCR plate") and perform the following:Dispense 75µLof PCR-grade water to "PCR plate"Dispense 25µL of 30% glycerol to two glycerol stock platesTransfer 25µL of grown pre culture in Luria-Bertani media plus transposon cassette antibiotic from to "PCR plate" and glycerol stock plates

    11.

    Cover glycerol stock plates with a storage membrane and store at -80ºC

    12.

    If not proceeding to the next step right away: Store "PCR plate" at 4ºC for a few days or cover with an storage membrane and store at -20ºC for longer term

    Master 96-well plate for PCR steps

    13.

    Transfer 50µL of selected colonies from one or more libraries to a 96-well plate with the following OT-2 protocol:

    OT-2 Protocol to transfer volume from several plates to a single plate 

    Control PCRs

    14.

    Safety information
    Positive control (donor plasmid) and wild-type control (P. putida or E. coli ) should be added to every reaction in this section.

    Spurious integration control with SEVA primers pairs PS3/PS4 and PS5/PS6

    OT-2 PCR sample preparation protocol  

    Note
    If <48 cfu are to be analyzed both PS3/PS4 and PS5/PS6 spurious integration controls can be done in a single 96-well plate

    15.

    Optional: Cargo integration control with primers PSMCS and either ME-O-Km-R/ME-O-Sm-R or ME-O-Gm-R (depending on transposon cassette antibiotic )

    Arbitrary PCRs

    16.

    Arbitrary PCR#1 using primer pairs ARB6 and ME-O-Km-Ext-F/ME-O-Sm-Ext-F or ME-O-Gm-Ext-F depending on transposon antibiotic cassette

    OT-2 PCR sample preparation protocol  

    Note
    The OT-2 protocol will perform the following steps:Prepare a PCR master mix Dispense 19 µL of PCR mastermixTransfer 2 µL of pre-culture from

    Safety information
    If different primer pairs are added to a single 96-well plate, the OT-2 script should be run separately for each primer pair

    17.

    Seal 96-well plate, place it in thermocycler and run the following PCR program:

    ABC
    98ºC5 min
    98ºC10 sx6 cycles
    30ºC30 s
    72ºC1 min 30 s
    98ºC10 sx30 cycles
    45ºC30 s
    72ºC1 min 30 s
    72 ºC5 min
    4ºChold
    18.

    Select 8-12 Arbitrary PCR#1 reactions from the 96-well plate and run them on a 1% agarose gel to verify amplification.

    Note
    Several bands will appear and even DNA smears even when the reaction has worked perfectly.

    19.

    Arbitrary PCR#2 using primers pairs ARB2 and ME-O-Km-Int-F/ME-O-Sm-Int-F or ME-O-Gm-Int-F depending on transposon antibiotic cassette

    OT-2 PCR sample preparation protocol  

    Note
    The OT-2 protocol will perform the following steps:Prepare a PCR master mix Transfer 1 µL of PCR product from Arbitrary PCR#1Dispense 19 µL of PCR mastermix

    20.

    Seal 96-well plate, place it in thermocycler and run the following PCR program:

    ABC
    98ºC30 s
    98ªC10 sx30 cycles
    52ºC30 s
    72ºC1 min 30 s
    72ºC5 min
    4ºChold
    21.

    Select 8-12 Arbitrary PCR#2 reactions from the 96-well plate and run them on a 1% agarose gel to verify amplification

    Note
    Several bands will appear and even DNA smears even when the reaction has worked perfectly.

    Sequencing and annotation

    22.

    Prepare a PCR plate to send to sequencing by mixing 10µL of unpurified Arbitrary PCR#2 reaction and 10µLof 10 µM sequencing primer (ME-O-Km-Ext-F/ME-O-Sm-Ext-F or ME-O-Gm-Ext-F depending on the transposon antibiotic cassette)

    Note
    These guidelines may vary depending on the sequencing service arranged for your laboratory.

    23.

    Annotate sequencing results by running the following protocol:

    Bacterial genome annotation script using BLASTN

    Note
    The python script uses as input:DNA sequencing results in .txt or .seqReference genome file in fasta formatGenome annotation file in fasta format

    Example

    24.

    In this section we show a specific example on how to run the workflow with the OT-2 liquid handler using a starting point three 96-well plates with P. putida KT2440 colonies picked from matings using cargos with either a kanamycin (pBLAM1-2), streptomycin (pBLAM1-4) or gentamicin (pBLAM1-6) resistance gene.

    25.

    Counter-selection and glycerol stocks pre-cultures s using the following OT-2 protocol in in two runs

    25.1.

    The following template. csv will dispense M9-citrate media containing ampicillin to three plates. Subsequently, each plate will be inoculated from each of the three starting plates.

    Variables-AntibioticPlatesCreation-OT.csv

    25.2.

    The following template. csv will dispense LB media with either gentamicin, kanamycin or streptomycin to each plates. Subsequently, each plate will be inoculated from each of the three starting plates.

    Variables-AntibioticPlatesCreation-OT.csv

    26.

    Colony selection in OT-2 liquid handler robot.

    Each LB plus cargo antibiotic plate will be run separately with the script in . For each library there is an input .csv file for the absorbance at 600nm in M9-citrate with either kanamycin, gentamicin or streptomycin and another .csv file for the absorbance at 600nm in M9-citrate ampicillin. The LB plate from step 25.2 will be used to inoculate the two glycerol stock plates and PCR plate.

    26.1.

    pBLAM1-2: .csv files and template .csv to run script

    Variables-ColonieScreening-OT.csv

    220920_M9Cit_ant_LibpBLAM12.csv

    220921_M9Cit_amp_LibpBLAM12.csv

    Output from the run (map with identifiers)

    map_220921_LibpBLAM12.csv

    26.2.

    pBLAM1-4: .csv files and template .csv to run script

    Variables-ColonieScreening-OT.csv

    220920_M9Cit_ant_LibpBLAM14.csv

    220921_M9Cit_amp_LibpBLAM14.csv

    Output from the run (map with identifiers)

    map_220921_LibpBLAM14.csv

    26.3.

    pBLAM1-6: .csv files and template .csv to run script

    Variables-ColonieScreening-OT.csv

    220920_M9Cit_ant_LibpBLAM16.csv

    220921_M9Cit_amp_LibpBLAM16.csv

    Output from the run (map with identifiers)

    map_220921_LibpBLAM16.csv

    27.

    Master 96-well plate for PCR steps to combine cultures from different transposon libraries in a single 96-well plate

    The following template.csv is to be run with the OT-2 script in

    Variables-SamplesMerging-OT.csv

    Output from the run (map with identifiers)

    maps_master_pcr-220923_5.csv

    28.

    Control PCRs to account for spurious integrations and the correct integration of the cargo

    28.1.

    Spurious integration control with PS3/PS4 and PS5/PS6 SEVA oligonucleotides

    The following template.csv was used for the OT-2 script in to prepare each mastermix with either PS3/PS4 or PS5/PS6 primer pairs and transfer cultures from Master 96-well plate

    Variables-PCRs-OT.csv

    Gels after PCR protocol in thermocycler

    Gel of the first 7 rows with the primers ps3 and ps4
    Gel of the first 7 rows with the primers ps3 and ps4
    Gel of the last 5 rows with the primers ps3 and ps4
    Gel of the last 5 rows with the primers ps3 and ps4
    Gel of the first 7 columns with the primers ps5 and ps6
    Gel of the first 7 columns with the primers ps5 and ps6
    Gel of the last 5 columns with the primers ps5 and ps6
    Gel of the last 5 columns with the primers ps5 and ps6
    28.2.

    Cargo integration control with PSMCS and either ME-O-Km-R/ME-O-Sm-R or ME-O-Gm-R

    The following template.csv was used for the OT-2 script in to prepare the mastermix and transfer cultures from Master 96-well plate

    We have discarted the first 3 columns because they came as negative (without integration) in the spurious PCRs.

    Gels after PCR protocol in thermocycler

    Gel of the columns 4 to 9 of the control of integration primers
    Gel of the columns 4 to 9 of the control of integration primers
    Gel of the columns 10 and half of the 11of the control of integration primers
    Gel of the columns 10 and half of the 11of the control of integration primers
    Gel of the columns 11 and half of the 12 of the control of integration primers
    Gel of the columns 11 and half of the 12 of the control of integration primers
    29.

    Arbitrary PCRs

    29.1.

    Arbitrary PCR#1

    The following three different template.csv were used (one for each primer pair) in three independent runs with the OT-2 script in using the same input and output plate to amplify the genomic context around each transposon cassette

    Variables for source plate 1 arbitrary PCR 1: Variables-PCRs-OT.csv

    Variables for source plate 2 arbitrary PCR 1: Variables-PCRs-OT.csv

    Variables for source plate 3 arbitrary PCR 1: Variables-PCRs-OT.csv

    29.2.

    Arbitrary PCR#2

    The following three different template.csv were used (one for each primer pair) in three independent runs with the OT-2 script in using the Arbitrary PCR#1 plate as input and the same output plate to amplify the genomic context around each transposon cassette

    Variables for source plate 1 arbitrary PCR 2: Variables-PCRs-OT.csv

    Variables for source plate 2 arbitrary PCR 2: Variables-PCRs-OT.csv

    Variables for source plate 3 arbitrary PCR 2: Variables-PCRs-OT.csv

    Gel results for arbitrary PCRs

    Gel for several wells in the final plate of the arbitrary PCRs. .1 is result of the first PCR and .2 is the second PCR
    Gel for several wells in the final plate of the arbitrary PCRs. .1 is result of the first PCR and .2 is the second PCR
    30.

    Sequencing and annotation of arbitrary PCR#2

    The following files were used:

    alignment_and_annotation_blastn.py Pseudomonas_putida_KT2440_110.fna Pseudomonas_putida_KT2440_110.csv sequencing_results.zip

    Note
    We only sent 61 samples, that is why sequencing_results.zip has 61 files

    推荐阅读

    Nature Protocols
    Protocols IO
    Current Protocols
    扫码咨询